Micromodule Single Switch Hidden Z-Wave Plus Nano Switch - Aeon Labs

54,95

Taxas não incluidas: € 45,41

Disponibilidade:
Em Stock
Código do produto:
ES-21-AEO-ZW139-EU
Fabricantes:
Aeotec

Descrição

Check any switches. Check any plug. Everywhere. Wireless.

Sockets and light switches are amazing inventions. They literally changed the world. But if you are not standing next to them or you can not reach them, they are limited. Not anymore. The future is smarter. So this is your home.

The Nano Switch offers complete wireless control of your switches and outlets.

Total control.

The Nano Switch offers total control, easily. Extremely small, each Nano Switch installs invisibly behind one of the existing switches or outlets in your home. Simply unscrew the front, install the Nano Switch behind it, and you now have a complete wireless control. Your old switches are instantly modern and connected.

Attention, this module requires the neutral to function.

FEATURES

  • Order Lighting / Remote
  • Installs behind an existing switch ON / OFF function
  • Potential free relay
  • Incorporates the Z-Wave 500 series chip
  • 250% faster communication compared to standard Z-Wave devices
  • Automatic detection of switch type
  • Protected against overloads and surges
  • Compatible with all Z-Wave and Z-Wave Plus controllers
  • Function for instantaneous and cumulative consumption 2 configurable inputs for switches
  • Connector for Touch Panel Switch (coming soon)
  • Use with toggle or pulse switch Small, discreet and aesthetic
  • Ease of use and installation

TECHNICAL CHARACTERISTICS

  • Module Type: Z-Wave Receiver
  • Power supply: 120-230VAC, 50 / 60Hz
  • Standby Power Consumption: 0.8W
  • Wiring: 3 wires
  • Max load: 10A
  • Status indicator: LED Frequency: 868.42 Mhz
  • Transmission distance: 150m in open field
  • Dimensions: 42mm x 39.5mm x 20mm
  • Operating Temperature Range: 0-40 ° C
  • Operating Humidity: 8-80%
  • Certifications: FCC, UL, CE, ROHS

Especificação

Compatibilidade controlador principal
eeDomus+ Full compatible
Fibaro Home Center 2 v4.160 Not tested
Fibaro Home Center Lite v.4.160 Not tested
Vera Edge / Plus Not tested
Zipabox/Zipamini/ZipaTile Not tested
Piper / Piper NV (v.1.7.1) Not tested
Indigo Not tested
jeedom Full compatible
Z-Wave.me / Z-Way / PoPP Hub Not tested
Domoticz Not tested
ZiHome Not tested
Tech Data
Power Supply 120-230VAC, 50 / 60Hz
Attachable Loads 10A
Explorer Frames - NWI Support Yes
SDK 6.51.09
App Version FW: 1.01:01.00
Device Type On/Off Power Switch
Z-Wave Alliance Product Link https://products.z-wavealliance.org/products/2289
Procedures
Incluison Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing.
Exclusion Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing.
Factory Reset Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable.

Perguntar

Fazer uma pergunta ou comentário

Obs: HTML não é suportado!

Mau            Bom


Continuar

Z-Wave Portugal

A loja online que vende soluções para a automação das habitações através das redes sem fios e do protocolo Z-Wave. Z-Wave é o standard internacional para as redes sem fio dos sistemas de controlo para habitações. Com base nestas soluções pode gerir a iluminação, a electricidade, os estores, os alarmes e muito mais, optimizando a utilização destes meios. Os produtos Z-Wave, mesmo os de diferentes fabricantes, funcionam bem em conjunto permitindo o controlo efectivo da casa inteligente.

Contact Us

Móvel:
+351 919655531
email:
info@z-wave.pt
Skype:
ar.alexandre.ramos

Twitter

Facebook