-600x600.JPG "Outdoor light with LED - L 810 LED iHF - Z-Wave Plus - STEINEL")
€ 199,00
Taxas não incluidas: € 164,46
Descrição
Thanks to the STEINEL Outdoor light L 810 LED with the invisible, intelligent high-frequency sensor (iHF sensor) you can light up your entrances and the fronts of buildings with a optical and technological high quality light.
The outdoor light offers stylish up and down lighting as well as soft light start and a manual override of 4 hours. The iHF sensor has got a 160° detection angle and it can detect motions in a range up to 5m.
Like every product of STEINEL the outdoor light can also integrated into any other Z-Wave network. In the App you can do every settings and at the same time you can turn ON and OFF the light with this App.
The pleasant warm white light brings more secrurity to your plot of land as well as optical highlights.
Technical Characteristics:
- Dimmable LED outdoor light with upward and downward illumination and intelligent high-frequency sensor
- Efficient lighting with soft light on and manual operation for 4 hours
- 160° angle of coverage and sensor range up to 5 m
- Freely selectable time setting, etc.
- Settings and ON/OFF control via App
- Power supply: 220-240V, 50/60Hz
- IP Class: IP44
- Light range: 2-2000 Lux
- Wireless technology: Z-Wave Plus
Especificação
| Compatibilidade controlador principal | |
|---|---|
| eeDomus+ | Not Tested |
| Fibaro Home Center 2 v4.160 | Partly Compatible |
| Fibaro Home Center Lite v.4.160 | Partly Compatible |
| Vera Edge / Plus / Secure | partly compatible |
| Zipabox/Zipaminicro/ZipaTile | Fully Compatible |
| Piper / Piper NV (v.1.7.1) | Not Tested |
| Indigo | Not Tested |
| jeedom | Not Tested |
| Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | fully compatible |
| Domoticz | Not Tested |
| OpenHAB | Not Tested |
| ZiHome | Not Tested |
| Somfy Tahoma | Not Tested |
| Home Assistant | Not Tested |
| Telldus | Not Tested |
| Tech Data | |
| IP Rating | IP44 |
| Power Supply | 220-240V, 50/60Hz |
| Attachable Loads | LED light Included |
| Explorer Frames - NWI Support | Yes |
| SDK | 6.51.09 |
| App Version | HW: 1 FW: 1.0:1.0 |
| Device Type | Light Dimmer Switch |
| Z-Wave Alliance Product Link | https://products.z-wavealliance.org/products/2309 |
| S2 Security Frame | No |
| Procedures | |
| Incluison | Inclusion = Add To start the light's inclusion mode, briefly press button (8) Adding L 810 LED iHF to the Smart Friends system: 1) Download Smart Friends app from the App Store. 2) In the rooms view, activate the edit mode. 3) Select the chosen room and press the "Add device" button. 4) Briefly press the device's button (8) to set the light to inclusion mode. The status LED (12) lights up to show that this mode is selected. 5) The app displays a confirmation message once inclusion has been successfully completed. |
| Exclusion | Exclusion = Remove To start the light's exclusion mode, briefly press button (8) Removing L 810 LED iHF from the Smart Friends system: 1) In the rooms view, activate the edit mode. 2) Select the device in the chosen room and press the "delete" button. Press delete and follow the instructions in the app. 3) Briefly press the device's button (8) to set the light to exclusion mode. The red status LED (12) lights up to show that this mode is selected. 4) The app displays a confirmation message once exclusion has been successfully completed. |
| Factory Reset | 1) Briefly press button (8) and directly afterwards keep it pressed for 5 seconds. 2) Status LED (12) briefly flashes to show that the light has been reset. 3) The device is now no longer included in the Z-Wave system and has been returned to factory settings. |
