€ 49,00
Taxas não incluidas: € 40,50
Descrição
The HEIMAN gas sensor is designed to avoid risks of gas leakage. In the case of detection, an alarm is activated, in addition to a Z-Wave signal sent to the main controller. It is possible to create different scenarios once alert. This detector is a Z-Wave product and therefore it is compatible with all the features offered by the 500 chipset series. A Z-Wave controller (or automation with USB) is required to integrate the detector into your network if you already have an existing network. Power by electrical network, the sensor can also serve as a repeater to extend your Z-Wave network.
CHARACTERISTICS
Z-Wave 500 series Audible alert capable of detecting a high level of gas (butane / propane) Lower energy consumption Automatic report of low battery repeater Easy installation
TECHNICAL CHARACTERISTICS
Protocol: Z-Wave Plus (868.42MHz)
Power supply: AC 100-240V. Alarm: 85 dB
Operating voltage: 3V Operating current: 90mA
Operating temperature: -10 ° C to + 50 ° C
Radio Range: 30m
Dimensions: 68 x 75 x 76 mm Weight: 90 g
Standards: EMC 2004/108 / CE R & TTE 1995/5 / CE, LVD 2006/95 / CE, FCC Part 15
Especificação
Compatibilidade controlador principal | |
---|---|
eeDomus+ | |
Fibaro Home Center 2 v4.160 | |
Fibaro Home Center Lite v.4.160 | |
Vera Edge / Plus / Secure | |
Zipabox/Zipaminicro/ZipaTile | |
Piper / Piper NV (v.1.7.1) | |
Indigo | |
jeedom | |
Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | |
Domoticz | |
OpenHAB | |
ZiHome | |
Somfy Tahoma | |
Home Assistant | |
Telldus | |
Tech Data | |
IP Rating | |
FLiRS | |
Power Supply | |
Attachable Loads | |
Explorer Frames - NWI Support | |
SDK | |
App Version | |
Device Type | |
Z-Wave Alliance Product Link | |
S2 Security Frame | |
Procedures | |
Incluison | |
Exclusion | |
Factory Reset | |
Wake Up |