€ 49,99
Taxas não incluidas: € 41,31
Descrição
The controller ZRC-90 Remotec scenes can execute scenes in your Z-Wave network. When one of the ZRC-90 buttons is pressed, your central controller or box Z-Wave home automation will receive a signal that it can use to trigger scripts.
With 8 buttons, each supporting short press and long press, you can control 16 different actions in your central controller. The ZRC-90 is an excellent solution for triggering events faster than taking your smartphone and start the application that manages your home.
The scenes controller is ideal for children and guests who can not access the mobile application on your smart home and therefore can not control the lighting, heating, air conditioning and other appliances.
With its practical wall bracket, the ZRC-90 can also be removed from the wall to keep it handy while you move into your home.
FEATURES:
- scenes of Z-Wave controller +
- Controls up to 8x2 scenes and 8 functional groups variation
- A configuration button and simple operation
- Report for the pressed one time, two times, released and held down
- unlimited control capacity through the box Automation
- Able to act as primary or secondary controller
- Compatible Z-Wave Plus
- Super slim, stylish design
- wall mount controller for storage or for use as a switch
TECHNICAL CHARACTERISTICS :
- Module Type: Z-Wave Controller
- Power: 2x AAA battery
- Z-Wave Frequency: 868.42MHz
- Range: 40m outdoor free field
- Operating Temperature: 0 to 40 ° C
- Storage temperature: -20 to 60 ° C
- Dimensions (W x H x L): 110mm x 70mm x 13.5mm
- weight:
- single controller: 60g
- Wall mount: 15g
- Z-Wave Certification: ZC10-15120001
Especificação
Compatibilidade controlador principal | |
---|---|
eeDomus+ | Full Compatible |
Fibaro Home Center 2 v4.160 | |
Fibaro Home Center Lite v.4.160 | |
Vera Edge / Plus / Secure | Not Tested |
Zipabox/Zipaminicro/ZipaTile | |
Piper / Piper NV (v.1.7.1) | Not Tested |
Indigo | Not Tested |
jeedom | Full Compatible |
Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | |
ZiHome | Not Tested |
Tech Data | |
IP Rating | IP 20 (Indoor use only) |
FLiRS | No |
Power Supply | Power supply: Rechargeable Lithium battery, 3.7 V, 500mAh. Battery charger input: Micro USB port, DC 5V±0.5V, max 1A. |
Explorer Frames - NWI Support | |
SDK | 6.51.06 |
Device Type | |
Peper1 Database link | |
Z-Wave Alliance Product Link | |
Routing | |
Procedures | |
Incluison | Turn the primary controller into inclusion mode, short press the product's Action Button that you can find in the back of the product. |
Exclusion | Turn the primary controller into exclusion mode, short press the product's Action Button that you can find in back of the product. |
Factory Reset | Press the Action Button once that you can find in the back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable. |
Wake Up | Press the Action Button once, which will trigger sending out the Wake up notification command, press and hold the Action Button for 3 seconds, which will toggle on/off the Sensor be waked up for 10 minutes. |