€ 57,99
Taxas não incluidas: € 47,93
Descrição
Micromodule for roller shutter PAN08 will allow you to control a motorized equipment such as store , garage door , gate or shutter using the Z-Wave protocol while maintaining your existing switch . You will therefore be able to operate the motor connected using the existing switch , a transmitter Z -Wave or directly from this button on the micro-module .
With its calibration technology , the PAN08 can be used to control many types of shutters. This module is able to detect the position of the component by using the measuring method of power , so that it can be remotely controlled not only fully up or down, but can also be set for example to 30 % or 50 % .
Z -Wave controller ( remote dongle ... ) is necessary to integrate this module in your network if you already have an existing network.
This Z -Wave module functions as a wireless repeater with other modules to ensure full coverage of your home.
Warning , this module requires the neutral to operate.
FUNCTIONS:
- Order your blinds or shutters remote
- Moved behind existing switches
- Adopts the latest Z- Wave chip 400series to support multichannel operations and a higher data rate ( 9.6/40/100kbps )
- SDK uses the Z -Wave 6.02
- Range of the antenna optimized
- Auto function inclusion
- Function up / down and positioning
- Protection against overload
- Very low power consumption, complies with the European Directive 2009/125/EC no. 1275/2008
- Small, discreet and aesthetic
- Ease of use and installation
SPECIFICATIONS:
- Module Type : Z- Wave Receiver
- Power supply: 90 ~ 240VAC
- Standby power consumption: 0.48 W
- Wiring: 3 son , neutral required
- Maximum load : 1100W
- Frequency: 868.42 Mhz
- Transmission distance : 30m
- Dimensions: 47.5x39x15.6 mm
- Weight: 30g
- Operating temperature : 0-40 ° C
- Z- Wave Certification : ZC08 - 13070030 , ZC08 - 13080002
Especificação
| Compatibilidade controlador principal | |
|---|---|
| eeDomus+ | Not Tested |
| Fibaro Home Center 2 v4.160 | Not Tested |
| Fibaro Home Center Lite v.4.160 | Partially Compatible |
| Vera Edge / Plus / Secure | Full Compatible |
| Zipabox/Zipaminicro/ZipaTile | Not Tested |
| Piper / Piper NV (v.1.7.1) | Not Tested |
| Indigo | Not Tested |
| jeedom | Not Tested |
| Domoticz | Not Tested |
| ZiHome | Not Tested |
| Vera 3 | Not Tested |
| Vera Lite | Not Tested |
| Tech Data | |
| IP Rating | |
| FLiRS | No |
| Power Supply | 90 ~ 240VAC |
| Attachable Loads | 1100W |
| Explorer Frames - NWI Support | No |
| SDK | 6.02 |
| App Version | 1.0 |
| Device Type | Slave with routing capabilities |
| Peper1 Database link | http://pepper1.net/zwavedb/device/451 |
| Generic Device Class | Multilevel Switch |
| Specific Device Class | Motor Control Class C |
| Routing | Yes |
