Mini Dimmer - Z-Wave Plus - Qubino

QUBINO MINI DIMMER

The Mini Dimmer is 25% smaller than the other wireless dimmers on the market. Thanks to its small size, it allows an easy and fast installation. The Mini Dimmer does not require a neutral wire (N). It works in a 2-wire configuration.

​

QUICK AND EASY INSTALLATION

Because of its small size, it is even suitable for the smallest, most superficial and most congested electrical boxes overflowing with wires.

VARIES ALL TYPES OF DIMMEABLE BULBS

Connect and remotely control low power bulbs. No minimum load required.

* Incandescent just 200W

* Halogen just 200W

* LED just 150W

* LED Strip just 150W

* Compact fluorescent.

IT IS SUITABLE FOR ALL TYPES OF FLUSH-MOUNTING HOUSING WORLDWIDE.

Reduce assembly time and installation costs. Install it quickly and easily behind a conventional switch.

Easily recognize if the Mini Dimmer is included or excluded from the network, be informed in case of overload or overheating and when calibration is in progress.

FUNCTIONS: 

• The Mini Dimmer Qubino is the smallest wireless dimmer in the world
• It can be installed in a 2-wire system - no neutral wire needed
• It can also be installed in a 3-wire system - with neutral wire
• Because of its small size, it is even suitable for the smallest, most superficial and most congested electrical boxes
• It is suitable for all types of flush-mounting housings worldwide
• You can connect and remotely control bulbs from 1W, no minimum load required
• You can vary all types of dimmable bulbs - incandescent, halogen, LED, LED strip, fluorescent
• It has LED signaling to easily recognize if the Mini Dimmer is included or excluded from the network, in case of overload or overheating and when calibration is in progress.
• Extremely low power consumption: less than 0.4 W

TECHNICAL CHARACTERISTICS :

• Power supply: 110 - 240 VAC 50Hz
• Nominal load current of the output: 0.85A
• Output circuit power (resistive load): 200W
• Accuracy of the consumption measurement (2 wires): ± 10%
• Accuracy of the consumption measurement (3 wires): ± 2%
• Operating temperature: -10 to +40 ° C
• Distance: up to 30 m inside
• Dimensions (W x H x D): 38mm x 33.5mm x 15.5mm
• Weight: 28 g
• Electricity consumption: 0.4 W
• For installation in boxes: Ø ≥ 60 mm or 2M
• Switching: MOSFET (phase break / trailing edge)
• Z-Wave Repeater: Yes

​

Fazer uma pergunta ou comentário

Digite o código na caixa de texto: