Smart Module FGS-224 - Double Dry Contact - Fibaro

The FIBARO Simart Module has been designed to activate and deactivate electrical devices. Thanks to its small size, it can be installed in junction boxes or flush-mounted boxes. The module is controlled either by the Z-Wave network or a simple switch. Connect your FIBARO Smart Module to your Z-Wave system and other devices to take advantage of almost endless possibilities!

This module has two potential-free (dry contact) relays with a timer function (used to create a pulse), so it can be used to change a conventional 230V voltage or any type of DC power source ( 5V, 12V .24 V DC). Therefore, it can be used to control any type of load, such as a boiler (connecting the dry contact instead of a thermostat) or a motorized door, garage door .

The integrated RGB diode is a great help during the installation process. The light will show if the FIBARO Smart Module has been added or removed from the network. You can also see if a calibration or update was successful.

 FUNCTIONS: 

• Controls two lights / devices remotely Installs behind an existing switch (bistable or monostable) 
• ON / OFF function 
• Two potential free relays (door control, boiler, garage door, etc.) 
• Integrates the Z-Wave 500 series chip 250% faster 
• Communication compared to standard Z-Wave 
• Devices Integrated scene trigger mechanism (via S2) 
• Security communication and notification classes 
• Diode configuration menu 
• Supports secure mode (Z-Wave Network Security) encrypted with AES-128 encryption 
• Integrated Z-Wave Network Coverage Tester 
• OTA software update (depends on controller) 
• Larger terminal blocks for easier wiring.
• Rounded shape to meet the highest standards. 
• Small, discreet and aesthetic. 
• Ease of use and installation. 

TECHNICAL CHARACTERISTICS : 

• Module type: Z-Wave receiver 
• Power supply: 100 - 240V ~, 50 / 60Hz or 24 - 30 Vdc 
• Wiring: 3 wires, neutral required (230V) 
• Maximum power:
  • Maximum current per output: 6A / 110 - 240V ~, 50 / 60Hz (differs depending on the type of load) 
  • Total maximum current: 9.5A / 110 - 240V ~, 50 / 60Hz (differs depending on the type of load) 
• Frequency: 868.42 Mhz 
• Transmission distance: 50m free field, 40m indoors (depends on building structure) 
• Signal strength: 1mW 
• Dimensions: 42.5mm x 38.25mm x 20.3mm (L x W x H) 
• Operating temperature: 0-35 ° C 
• Standards: CE, ROHS, 2011/65 / EU, 2014/53 / EU, 2015/863, ZWAVE PLUS

Fazer uma pergunta ou comentário

Digite o código na caixa de texto: