Detector de fumo Fibaro certificado CE EN 14604 Z-Wave Plus


Taxas não incluidas: € 71,89

Em Stock
Código do produto:


The finest and most functional in the world smoke detector!

With smooth lines of a polished surface and a small size, this smoke alarm will alert a threat with multicolored RGB LEDs and a built siren. The large size of the network can detect the least amount of smoke to get a quick answer. Therefore, easily find its place in your home to preserve the security of the whole family. The smoke detector Fibaro FGSD-002 is an alarm Standalone Smoke Detector (DAAF) according to EN 14604: 2005. Although autonomously, also communicating with the Z-Wave Plus technology. Some materials burn without smoke. That's why Fibaro engineers decided to include additional protection in your smoke detector and a temperature sensor. If the amount of smoke is not sufficient to activate the alarm, the device will still be able to detect a threat by detecting a rapid change in temperature caused by fire. A rapid change in temperature or increased to 54 ° C is sufficient for the smoke sensor detects a threat and warn the inhabitants of the house. Only this type of smoke sensor provides high efficiency, whatever is burning.

The sensitivity of the sensor can be adjusted according to the place where it is installed. In the kitchen, a very sensitive sensor may activate the alarm even when frying meat, so it should be less sensitive, helping to prevent irritating false alarms. In other rooms, where it is less likely the presence of smoke in normal conditions, the sensor must be set to the maximum sensitivity to provide the best protection. An integrated smoke detector "black box" records information about smoke levels and temperature. The alarm system is armed or not, the sensor monitors the level of smoke and sends the information to the host controller periodically. Now you can detect the slightest amount of smoke from a cigarette. For your safety, and to ensure that the smoke alarm is working properly, it has been equipped with a tester range of Z-Wave network. Network communication wireless mesh Z-Wave lets you stay connected to the controller over long distances and through indirect connectivity with other Z-Wave modules. The integrated LED allows you to easily check if the sensor has a good range and can communicate with Fibaro system or requires a different location. Z-Wave (remote control, dongle ...) to integrate this module in your network if you already have an existing network controller required.


  •  Smoke detector Z-Wave
  •  Battery powered
  •  Adjustable sensitivity sensor (3 levels)
  •  Protection against sabotage
  •  Alarm sound indicated by an LED light and a signal Z-Wave
  •  Fire detection by measuring the air temperature
  •  Automatic test leads effectively gives out every 5 seconds
  •  "Black Box" Integrated - the sensor reports and records temperature data and smoke
  •  Coverage Tester integrated Z-Wave network
  •  Complies with EN 14604: 2005
  •  Compatible Z-Wave Plus
  •  Wireless Update with case Fibaro Home Center 2
  •  Simple installation - only needs to be installed in a place where there is risk of fire


  •  Module Type: Z-Wave Transmitter
  •  Power: 3V CR123A lithium battery
  •  Battery life: 3 years • Frequency: 868.42 MHz
  •  Transmission distance: 50m free field, 30 meters indoor
  •  Dimensions: 65 x (diameter x height) 28 mm
  •  Operating temperature: 0-55 ° C
  •  Operating Humidity: 0% - 93%
  •  Temperature measurement range: -20 to 100 ° C
  •  Sensitivity Smoke: 1st level - 1.20 +/- 0.5% obs / m; Second level - 1.80 +/- 0.5% obs / m; 3rd level - 2.80 +/- 0.5% obs / m
  •  Noise level: 85 dB at 3 m
  •  Measurement accuracy: 0.5 ° C (range of 0-55 ° C)
  •  Standards: EMC 2004/108 / EC and R & TTE 199/5 / US
  •  Certifications: EN 14604: 2005


Compatibilidade controlador principal
eeDomus+ Full Compatible
Fibaro Home Center 2 v4.160 Full Compatible
Fibaro Home Center Lite v.4.160 Full Compatible
Vera Edge / Plus / Secure Not Tested
Zipabox/Zipaminicro/ZipaTile Full Compatible
Piper / Piper NV (v.1.7.1) Full Compatible
Indigo No tested
jeedom Full Compatible
Domoticz Not Tested
ZiHome Not Tested
Vera 3 Not Tested
Vera Lite Not Tested
Tech Data
IP Rating
Power Supply lithium battery 3V CR123A
Explorer Frames - NWI Support No
SDK 6.51.06
App Version 3.3
Device Type Notification Sensor
Peper1 Database link
Z-Wave Alliance Product Link
Generic Device Class Alarm Sensor
Specific Device Class Routing Alarm Sensor
Incluison Fibaro Smoke Sensor inclusion: 1) Install the battery. Visual indicator will signal the Z-Wave network inclusion status (green - device included, red - device not included) 2) Make sure the device is located within direct range of the Z-Wave controller. 3) Set the main controller into the learning mode (see main controllers operating manual). 4) Quickly, triple click the B-button, located on Fibaro Smoke Sensors enclosure. 5) Fibaro Smoke Sensor will be detected and included in the Z-Wave network.
Exclusion 1) Make sure there is a battery installed 2) Set the main controller into the learning mode (see main controllers operating manual) 3) Quickly, triple click the B-button, located on Fibaro Smoke Sensors enclosure.
Factory Reset Please use this procedure only in the event that the system primary controller is missing or otherwise inoperable. Fibaro Smoke Sensor reset procedure: 1) Make sure the device has the battery installed. 2) Press and hold the B-button for 3 seconds. Visual indicator will glow white. 3) You will hear a short signal. 4) Release the B-button. 5) Wait until the visual indicator glows yellow, signaling entering the 4th menu level. 6) Press the B-button briefly to confirm menu level choice. At the same time you will hear a short beep, the same sound as during the power connection. Successful reset will be confirmed with the visual indicator changing colour to red and fading. At the same time, short beep will sound, same as at the power connection
Wake Up The Smoke Sensor will wake up at defined time interval and will ALWAYS try to communicate with the main controller. There is a possibility to wake the device up manually by triple-click the B-button.


Fazer uma pergunta ou comentário

Obs: HTML não é suportado!

Mau            Bom


Z-Wave Portugal

A loja online que vende soluções para a automação das habitações através das redes sem fios e do protocolo Z-Wave. Z-Wave é o standard internacional para as redes sem fio dos sistemas de controlo para habitações. Com base nestas soluções pode gerir a iluminação, a electricidade, os estores, os alarmes e muito mais, optimizando a utilização destes meios. Os produtos Z-Wave, mesmo os de diferentes fabricantes, funcionam bem em conjunto permitindo o controlo efectivo da casa inteligente.

Contact Us