Z-Scene Controller Heat-it

The Heatit Z-Wave Scene Controller is a Z-Wave module specifically adapted to Gira KNX touch sensors. 

The Heatit Z-Wave Scene Controller is a device with built-in wireless Z-Wave communication that may be used to control other Z-Wave devices such as dimmers, relay modules, etc. The scene controller has a built-in relay that can be used to turn on and off a local load, e.g. a lamp, thus replacing a standard 1-pole switch. The Heatit Z-Wave Scene Controller consists of six switches, two switches behind each of the three buttons. Each switch can be used individually or configured to work in pairs. For instance: One side of the button switches the light on, while the other side switches it off. The module also functions as a scene controller by transferring various scene commands when the push buttons are pressed in different ways. All of the 6 buttons can be programmed to have different functionalities. In addition to this, the Heatit Z-Wave Scene Controller acts as a repeater and is able to extend the range of your Z-Wave network. 

The switch fits into standard Elko, Schneider Exxact and Gira® System 55 frame systems.

Features: 

• Scene Controller and switch Repeater function 
• Up to 6 different channels
• All six LED-diodes are controlled individually and their functionality is configurered in the gateway
• Ratings: 230V 50Hz 
• Max load: 1.000W, 5A (resistive) or up to 150W (inductive)
• Power consumption: 0.8W (0.3W standby)
• Wireless technology: Z-Wave Plus

Fazer uma pergunta ou comentário

Digite o código na caixa de texto: