Water Sensor 7 Pro - Z-Wave Plus 700 - AEOTEC


Taxas não incluidas: € 37,18

Em Stock
Código do produto:


The Water Sensor 7 Pro is a sensor designed to detect drips and leaks and help mitigate water damage through the use of wireless coupled technologies such as water shut-off valves.

Battery powered and built on Gen7 and 700 Z-Wave technologies, the Water Sensor 7 Pro was designed as a set-it-and-forget-it product with up to 3 years of battery life.

The Water sensor 7 Pro provides optional automation technologies, including analysis of temperature, humidity and potential risk of mold. These technologies have been specially designed when the Water Sensor 7 Pro is used in humid spaces, such as bathrooms, in order to better manage and protect them.

Leak protection

It doesn't just monitor when the water is going bad. When connected to a Z-Wave automation system, the Water Sensor 7 Pro can take protective action to help limit the amount of damage caused by drips, leaks, bursts, or any other water flow.

Heating management
A sensor with sensors. The Water Sensor 7 Pro monitors the temperature of a room between -10°C and 65°C and with a variation of only ±1°C. This precise environmental data can be used to monitor and manage a room's connected heating or cooling systems.

Air quality management
temperature for comfort. Moisture for health. In addition to ambient temperature monitoring, the Water Sensor 7 Pro measures and monitors the relative humidity of a room between 0% and 80% with a variation of only ±3%.

With real-time humidity monitoring, the Water Sensor 7 Pro can be used to automatically manage a room's air quality, activating exhaust fans in bathrooms and humidifiers and dehumidifiers in others. When managed with a smart home gateway, the Water Sensor 7 Pro can also use aërQ technology to monitor the potential for harmful mold spores to form in a room.

Quality foundation
The accuracy, reliability and compatibility of the Water Sensor 7 Pro starts at its base. With its leaky processor of just 70x30mm, it was built on Aeotec's exclusive Gen7 technology, allowing it to be installed wirelessly almost anywhere in a room and running for 3 years before its only 3.6 volt battery needs to be changed.


  • High precision 0.5mm leak detection via detection probe
  • Temperature measurement for HVAC including underfloor heating
  • Humidity measurement for ventilation and airflow automation especially in humid spaces
  • integrated aërQ; Aeotec Mold Potential Analysis Technology
  • Ultra-compact form factor
  • Designed with Gen7 technologies and 700 series Z-Wave chip inside
  • Gen7 enables compatibility with Security 2 and SmartStart
  • 3 environmental measurement technologies plus leak and drip detection


  • Power supply: 1/2 AA ER14250 3.6V battery
  • Battery life: up to 3 years
  • Radio Frequency: 868.42MHz
  • Operating distance: up to 150 meters outdoors, 50 meters indoors
  • Humidity range: 0 to 80% RH (+/- 3%)
  • Temperature range: -10 to 65°C (+/- 1°C)
  • Operating Humidity: 10-95%
  • Operating temperature: 0°C to 45°C
  • Cable length: 1.5m
  • Dimensions: 70x13x20mm
  • Weight: 42g


Compatibilidade controlador principal
eeDomus+ Full Compatible https://doc.eedomus.com/es/index.php/Water_Sensor_7_Pro_(ZWA019)
Fibaro HC3 Lite 5.090.V2 Full Compatible
Fibaro Home Center 2 v4.160 Full Compatible
Fibaro Home Center Lite v.4.160 Full Compatible
jeedom Full Compatible
Smartthings Full Compatible
Tech Data
IP Rating IP20
Power Supply ER14250 (1/2AA)
Z-Wave Alliance Product Link https://products.z-wavealliance.org/products/3872?selectedFrequencyId=1 Certificacion 6 June 2020
S2 Security Frame Yes
Factory Reset
Supported Home Automation Protocols
Z-Wave Plus Yes Zwave Plus v2 700 Series


Fazer uma pergunta ou comentário

Obs: HTML não é suportado!

Mau            Bom


Z-Wave Portugal

A loja online que vende soluções para a automação das habitações através das redes sem fios e do protocolo Z-Wave. Z-Wave é o standard internacional para as redes sem fio dos sistemas de controlo para habitações. Com base nestas soluções pode gerir a iluminação, a electricidade, os estores, os alarmes e muito mais, optimizando a utilização destes meios. Os produtos Z-Wave, mesmo os de diferentes fabricantes, funcionam bem em conjunto permitindo o controlo efectivo da casa inteligente.

Contact Us