Bi-directional radio interface 433 / 868MHz USB RFPlayer RFP1000 - RFPLAYER

149,00

Taxas não incluidas: € 123,14

Disponibilidade:
Out Of Stock
Código do produto:
ES-78-RFP-RFP1000
Fabricantes:
RF Player

Descrição

Bi-directional radio interface 433 / 868MHz USB RFPlayer RFP1000 - RFPLAYER  

RFP1000, the first USB stick that makes your home multilingual!

The RFP1000 interface connects the wireless home automation appliances already installed in the house and operating on the protocols most commonly encountered:

  • SOMFY RTS (Shutters, Gates)
  • DELTADORE X2D (Alarm, heating, home automation)
  • VISONIC (alarm)
  • CHACON / DIO (home automation)
  • SCIENTIFIC OREGON (weather station devices)
  • Full list on www.rfplayer.com

The RFP1000 interface is bidirectional and transmits as well as it receives simultaneously the 433 and 868Mhz radio frequencies. The RFP1000 connects via USB to the main home automation BOXs and multiplies their capacities to interact with their environment. It has the most sophisticated mechanisms to maximize its performance:

  • OSD (One Stage Decoder)
  • LBT (Listen Before Talk)
  • High immunity to noise by filters SAW (Surface Acoustic Wave)

The RFP1000 has other resources to manipulate protocols that are unknown to it:

  • RPP1000 knows how to cooperate with the Open Source community thanks to its RFLINK compatible interface. RF Player records unknown radio frames and supplies them to the RFLINK software for analysis in the home automation system. Conversely, RFP1000 knows how to transmit radio frames concocted by RFLINK software.
  • RFP1000 ships an amazing companion: PARROT!

Function PARROT

If you teach him, PARROT knows how to memorize 433 and 868Mhz radiofrequency frames with great precision. He only needs to listen to them. His understanding of the plots is "phonetic".
Later, he will be able:

  • To recognize them in real time if they appear on the airwaves, very useful information for a home automation BOX,
  • To re-transmit them when the home automation system wishes it at the appropriate time.

PARROT adapts to the unknown.

Repeater function

Domotic transmissions are subject to scope problems. This is due :

  • Has a phenomenon called "fading" which can intervene even at a relative proximity between transmitter and receiver of the signal.
  • At the intrinsic attenuation of the signal with the distance.

The RFP1000 plugs into a 220V-USB power supply in standalone mode to provide the repeater function, which will re-amplify the signal while drastically reducing the probability of fading. The scope is therefore greatly increased and the radiofrequency exchanges carried out with better reliability.

Repetition is intelligent:

  • The frames are recognized and re-shaped,
  • RFPlayer waits for the best time to re-transmit the signal to avoid radio frequency collision.

PARROT can contribute to this rehearsal, to say the least to a parrot!

Transcoder Function

The TRANSCODER function allows the repeater to convert on-the-fly frames from one protocol to another output protocol, including those memorized by PARROT.
An inexpensive remote control with many channels can replace several expensive remote controls with fewer channels ... A closed house automation box (without USB port) can extend the scope of its covered protocols ...
An alarm becomes capable of taking into account information previously inaccessible ... All gain in connectivity.
The RFP1000 comes with 2 antennas and a USB cable. A multiplatform configuration / setup software will be available for download at www.rfplayer.com

FUNCTIONS:

  • RF transmitter and receiver 433MHz and 868Mhz
  • Supports a wide range of sensors and actuators
  • Support for X10 devices and compatible (X'dom, ebode, ...)
  • Support for Chacon and compatible devices
  • Delta Dore X2D protocol support
  • Support for the Somfy RTS protocol (roller shutters, blinds, ...)
  • Support for Visonic PRO and compatible (433MHz and 868MHz)
  • Support for Oregon Scientific probes (V1, V2.1 and V3)
  • Support for OWL power consumption meters (CM130, CM119 and CM160)
  • PARROT function for learning and re-transmitting radio frames
  • Repeater function to increase the radio range of your devices
  • Transcoder function to convert a received frame to another protocol
  • Supported by many software and home automation box
  • Product made in France

 
 TECHNICAL CHARACTERISTICS:

  • Power: Via USB
  • Frequency: 433MHz & 868MHz
  • Type: Transmitter / Receiver
  • Connectivity: USB
  • Dimensions (W x H x H): 112.45mm x 34mm x 16.7mm
  • Weight: 120g

Especificação

Compatibilidade controlador principal
eeDomus+ Full Compatible
Vera Edge / Plus / Secure Full Compatible
Indigo Not tested
jeedom Full Compatible
Z-Wave.me / Z-Way / PoPP Hub Not tested
Domoticz Full Compatible
Tech Data
Power Supply USB

Perguntar

Fazer uma pergunta ou comentário

Obs: HTML não é suportado!

Mau            Bom


Continuar

Z-Wave Portugal

A loja online que vende soluções para a automação das habitações através das redes sem fios e do protocolo Z-Wave. Z-Wave é o standard internacional para as redes sem fio dos sistemas de controlo para habitações. Com base nestas soluções pode gerir a iluminação, a electricidade, os estores, os alarmes e muito mais, optimizando a utilização destes meios. Os produtos Z-Wave, mesmo os de diferentes fabricantes, funcionam bem em conjunto permitindo o controlo efectivo da casa inteligente.

Contact Us

Móvel:
+351 919655531
email:
info@z-wave.pt
Skype:
ar.alexandre.ramos

Twitter

Facebook