€ 42,96
Taxas não incluidas: € 35,50
Descrição
The repeater Aeon Labs allows both repeat and amplify the signals to extend the scope of the communication between the Z-Wave Plus in the same network. It thus offers the possibility of obtaining a Z-Wave Plus mesh quality.
This repeater supports exploration Z-Wave Plus frames that allows network étandue inclusion (NWI) and dynamic route discovery for other Z-Wave Plus products that also support exploration frames.
With its small footprint, the repeater Aeon Labs will not block the outlet from below (when plugged into the top), or next.
FUNCTIONS:
- Extends the range, reliability and increases the strength of the communication signal between Z-Wave Plus devices.
- Supports frames exploration Z-Wave. Repeats the Z-Wave Plus messages.
- Small form factor that is not intrusive and does not block other sockets.
SPECIFICATIONS:
- Module Type: Repeater Z-Wave Plus
- Plug type: European Schuko
- Power: 230V/50Hz
- Consumption: 70mA/1.8W
- Frequency: 868.42 Mhz
- Range: up to 30 m in buildings
- Operating temperature: -20 ° C to +50 ° C
- Dimensions: 44 x 44 x 60 mm (plug included)
- Certifications: UL, FCC, CE, C-TICK, ROHS
Especificação
| Compatibilidade controlador principal | |
|---|---|
| eeDomus+ | full compatible |
| Fibaro Home Center 2 v4.160 | Full compatible |
| Fibaro Home Center Lite v.4.160 | Full compatible |
| Zipabox/Zipaminicro/ZipaTile | only associations (no scenes) |
| Piper / Piper NV (v.1.7.1) | Not Tested |
| Indigo | only associations (no scenes) |
| jeedom | full compatible |
| Domoticz | only associations (no scenes) |
| ZiHome | Not Tested |
| Vera 3 | only associations (no scenes) |
| Vera Lite | only associations (no scenes) |
| Tech Data | |
| IP Rating | |
| FLiRS | |
| Power Supply | 230V/50Hz |
| Explorer Frames - NWI Support | |
| SDK | |
| App Version | |
| Device Type | Slave with routing capabilities |
| Peper1 Database link | |
| Generic Device Class | Repeater Slave |
| Specific Device Class | Basic Repeater Slave |
| Routing | Yes |