€ 89,99
Taxas não incluidas: € 74,37
Descrição
Control of lighting, control of scenes, Z-Wave control device.
By using Aeotec WallMote you can control devices and scenes in your smart home with ease and intuition both on the wall and in the hand.
The Aeotec WallMote is a 2-button fixed wall switch and portable remote control in one. The device can control other devices such as wall plugs, blinds, dimmers, lights, electronic door locks, scenes and many more.
Aeotec WallMote can activate the corresponding functions with a single click. In addition, it dominates the call "slip". This tactile control system allows you to slide with a single finger through the relevant area on the WallMote to dim the lights by intuition, for example.
The battery-powered touch switch comes with a magnet that allows the device to be held in the wall bracket. In this way, WallMote becomes a wall switch. You can also take the device away and use it as a portable remote control.
CHARACTERISTICS:
- Wireless control with 2 contact areas (Buttons)
- Sliding function
- Vibration during operation
- Status of the integrated color LED display
- Built-in rechargeable battery, which can be charged via Micro-USB
- Wireless Technology: Z-Wave Plus
- Dimensions: 76 x 76 x 11 mm
Especificação
| Compatibilidade controlador principal | |
|---|---|
| eeDomus+ | full compatible |
| Fibaro Home Center 2 v4.160 | full compatible |
| Fibaro Home Center Lite v.4.160 | partly compatible |
| Vera Edge / Plus / Secure | not compatible |
| Zipabox/Zipaminicro/ZipaTile | full compatible |
| Piper / Piper NV (v.1.7.1) | Not tested |
| Indigo | Not tested |
| jeedom | Not tested |
| Z-Wave.me / Z-Way / PoPP Hub | Not tested |
| Domoticz | Not tested |
| ZiHome | Not tested |
| Tech Data | |
| FLiRS | no |
| Power Supply | Built in Rechargeable battery, which can be charge via Micro-USB |
| Explorer Frames - NWI Support | no |
| SDK | 6.61.00 |
| App Version | FW: 1.05 |
| Device Type | Wall Controller |
| Z-Wave Alliance Product Link | https://products.z-wavealliance.org/products/2234 |
| Procedures | |
| Incluison | Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing. |
| Exclusion | Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing. |
| Factory Reset | Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable. |
| Wake Up | |
