€ 59,99
Taxas não incluidas: € 49,58
Descrição
The Popp door opener control module integrates your door into your smart home. With this small device, you can open the front door of your home from any Z-Wave remote control or your smartphone. Very useful for example when you are away and your children arrive at home without their key. With the first Z-Wave-controlled door-opening module, the home door can be integrated into your home automation system. The device complements the existing electric strike, communicates with the Z-Wave controller and allows opening the door from remotes, a smartphone or tablet. So you can go home without using a key. The Popp door opener control module can be powered by a battery or the transformer power supply of a doorbell (12VDC or 12VAC). This device is a secure Z-Wave Plus device and can be used in a wireless Z-Wave network with other certified devices, regardless of their origin and brand. It supports secure communication if the central controller supports secure communication.
FUNCTIONS:
- Pilot the opening of your door remotely
- Can be installed on an existing electric strike
- Can be powered by a transformer or a battery
- Supports secure communications Z-Wave Plus Technology
- IP20 protection (requires installation in a waterproof box for outdoor installation)
TECHNICAL CHARACTERISTICS :
- Module Type: Z-Wave Receiver
- Power Supply : Transformer 8-12VAC / 8-24VDC 9V battery
- Frequency: 868.42 Mhz
- Range: up to 100 m outdoors, up to 40 m in buildings
- Protection class: IP20
- Dimensions: 56 x 25 x 14 cm Weight: 20g
Manual:
Especificação
| Compatibilidade controlador principal | |
|---|---|
| eeDomus+ | Full Compatible |
| Fibaro Home Center 2 v4.160 | Partial |
| Fibaro Home Center Lite v.4.160 | Partial |
| Vera Edge / Plus / Secure | |
| Zipabox/Zipaminicro/ZipaTile | |
| Piper / Piper NV (v.1.7.1) | |
| Indigo | |
| jeedom | |
| Z-Wave.me / Z-Way / PoPP Hub | |
| Domoticz | |
| ZiHome | |
| Somfy Tahoma | |
| Home Assistant | |
| Telldus | |
| Tech Data | |
| IP Rating | IP20 |
| FLiRS | YES (parameter option) |
| Power Supply | The lock mechanics and the Z-Wave control are operated by a 9V block battery or an external 8-12V AC / 8-24V DC transformer |
| Attachable Loads | |
| Explorer Frames - NWI Support | Yes |
| SDK | 6.51.09 |
| App Version | HW: 1 FW: 1.04 |
| Device Type | Door Lock Keypad |
| Z-Wave Alliance Product Link | https://products.z-wavealliance.org/products/2147 |
| Procedures | |
| Incluison | Pressing the Z-Wave button for one second includes the device. It is not allowed to operate the device in a non-secure environment. This means that the including controller must support Secure Command Class. |
| Exclusion | A single click on the button will exclude the device. |
| Factory Reset | To do a factory reset press the Z-Wave button on the bottom of the device for at least 10 seconds. This procedure should only be used when the primary controller is missing or inoperable. |
