€ 57,99
Taxas não incluidas: € 47,93
Descrição
Micromodul PAN04 dual switch allows you to control two lights or two devices remotely using the Z-Wave protocol while maintaining your existing switches. You will therefore be able to operate connected loads using existing switches , transmitter Z -Wave or directly from this button on the micro-module .
With its calibration technology , the PAN04 can be used to turn on and off many types of lamps, for example incandescent, fluorescent and LED .
In addition, this micro-module is capable of transmitting the instantaneous power consumption (W) and cumulative ( KWh) equipment attached to it . It also features protection against overload .
Z -Wave controller ( remote dongle ... ) is necessary to integrate this module in your network if you already have an existing network.
This Z -Wave module functions as a wireless repeater with other modules to ensure full coverage of your home.
Warning , this module requires the neutral to operate.
FUNCTIONS :
- Order two lights / appliances remotely
- Moved behind existing switches
- Use with rocker switch or pulse
- Adopts the latest Z- Wave chip 400series to support multichannel operations and a higher data rate ( 9.6/40/100kbps )
- SDK uses the Z -Wave 6.02
- Range of the antenna optimized
- Auto function inclusion
- ON / OFF function
- Measurement of the instantaneous and cumulative consumption
- Protection against overload
- Automatic status report after manual load control via the switch
- Automatic ratio of consumption at a 5% change
- Very low power consumption, complies with the European Directive 2009/125/EC no. 1275/2008
- Small, discreet and aesthetic
- Ease of use and installation
SPECIFICATIONS:
- Module Type : Z- Wave Receiver
- Power supply: 90 ~ 240VAC or 24 -60V DC ± 10%
- Standby power consumption: 0.48 W
- Wiring: 3 son , neutral required
- Maximum load: 1500W per output
- Frequency: 868.42 Mhz
- Transmission distance : 30m
- Dimensions: 47.5x39x15.6 mm
- Weight: 30g
- Operating temperature : 0-40 ° C
- Z- Wave Certification : ZC08 - 13040018
Especificação
Compatibilidade controlador principal | |
---|---|
eeDomus+ | Full compatible |
Fibaro Home Center 2 v4.160 | only associations (no scenes) |
Fibaro Home Center Lite v.4.160 | only associations (no scenes) |
Vera Edge / Plus / Secure | full compatible |
Zipabox/Zipaminicro/ZipaTile | Compatible (Testing) |
Piper / Piper NV (v.1.7.1) | full compatible |
Indigo | Compatible (Testing) |
jeedom | not tested |
Domoticz | Compatible (Testing) |
ZiHome | not tested |
Vera 3 | Compatible (Testing) |
Vera Lite | Compatible (Testing) |
Tech Data | |
IP Rating | |
FLiRS | |
Power Supply | 90 ~ 240VAC o 24 -60V DC ± 10 % |
Attachable Loads | 1500W each output |
Explorer Frames - NWI Support | |
SDK | 6.02 |
App Version | |
Device Type | Slave with routing capabilities |
Peper1 Database link | http://pepper1.net/zwavedb/device/453 |
Generic Device Class | Binary Switch |
Specific Device Class | Binary Power Switch |
Routing |