€ 53,87
Taxas não incluidas: € 44,52
Descrição
Micromodule PAN06 dual switch allows you to control two lights or two devices remotely using the Z-Wave protocol while maintaining your existing switches. You will therefore be able to operate connected loads using existing switches , transmitter Z -Wave or directly from this button on the micro-module .
With its calibration technology , the PAN06 can be used to turn on and off many types of lamps, for example incandescent, fluorescent and LED .
This module has two potential-free relay (dry contact) with common entry point , it can be used either to switch a conventional 230V or DC power supply (5V, 12V .. 24V DC) any type. Thus, it can be used to drive any load as a boiler ( by connecting dry contact instead of a thermostat) or an automatic gate , garage door ...
Z -Wave controller ( remote dongle ... ) is necessary to integrate this module in your network if you already have an existing network.
This Z -Wave module functions as a wireless repeater with other modules to ensure full coverage of your home.
Warning , this module requires the neutral to operate.
FUNCTIONS :
- Order two lights / appliances remotely
- Moved behind existing switches
- Use with rocker switch or pulse
- Adopts the latest Z- Wave chip 400series to support multichannel operations and a higher data rate ( 9.6/40/100kbps )
- SDK uses the Z -Wave 6.02
- Range of the antenna optimized
- Auto function inclusion
- Double potential-free relay
- ON / OFF function
- Automatic status report after manual load control via the switch
- Very low power consumption, complies with the European Directive 2009/125/EC no. 1275/2008
- Small, discreet and aesthetic
- Ease of use and installation
SPECIFICATIONS:
- Module Type : Z- Wave Receiver
- Power supply: 90 ~ 240VAC or 24 -60V DC ± 10%
- Standby power consumption: 0.48 W
- Wiring: 3 son , neutral required
- Maximum load: 1500W per output
- Frequency: 868.42 Mhz
- Transmission distance : 30m
- Dimensions: 47.5x39x15.6 mm
- Weight: 30g
- Operating temperature : 0-40 ° C
- Z- Wave Certification : ZC08 - 13050004
Especificação
Compatibilidade controlador principal | |
---|---|
eeDomus+ | full compatible |
Fibaro Home Center 2 v4.160 | Partial |
Fibaro Home Center Lite v.4.160 | Partial |
Vera Edge / Plus / Secure | full compatible |
Zipabox/Zipaminicro/ZipaTile | Full Compatible |
Piper / Piper NV (v.1.7.1) | full compatible |
Indigo | Not tested |
jeedom | not tested |
Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | Only one channel |
Domoticz | full compatible |
ZiHome | not tested |
Vera 3 | Not tested |
Vera Lite | Not tested |
Tech Data | |
IP Rating | IP 20 |
FLiRS | No |
Power Supply | 90 ~ 240VAC or 24 -60V DC ± 10 % |
Attachable Loads | 1500W each output |
Explorer Frames - NWI Support | YES |
SDK | 6.51.02 |
App Version | 1.6 |
Device Type | Binary Power Switch |
Peper1 Database link | |
Generic Device Class | Binary Switch |
Specific Device Class | Binary Power Switch |
Routing | Yes |