€ 49,99
Taxas não incluidas: € 41,31
Descrição
FIBARO - Z-Wave Keyboard Remote Control + Fibaro Keyfob FGKF-601
Z-Wave key ring + Fibaro Keyfob
The FIBARO KeyFob is a compact Z-Wave Plus compatible remote control. Six buttons allow you to control other devices via the Z-Wave network and perform various scenes defined in the controller or home automation box. You can configure actions for one, two, three support and maintain support to meet all your needs. An integrated locking system will ensure that no unauthorized person takes control of your home.
IDEALLY DESIGNED
The KeyFob has been designed with precise attention to detail. Its ergonomics and compact shape allow it to fit perfectly in your hand, and the pocket, while the raised buttons allow an intuitive support.
PERFECTION IN EACH ELEMENT
The modern design of the KeyFob is only the first layer of its perfection. Inside the device is the most advanced electronic technology developed by FIBARO engineers to meet and exceed all possible smart home challenges.
FAST AND EASY INCLUSION
Adding a device to the system is as intuitive as using it. Install the KeyFob and feel like everything has become much easier.
TRY 24 COMBINATIONS ...
Each press of a button responds to an option of 1, 2 or 3 presses and held down. This offers up to 24 possibilities in total.
... AND ADD 6 SEQUENCES
To configure the six sequences, use a combination of 2 to 5 buttons. This gives a total of 30 possible actions.
SECURED BY PIN CODE
The KeyFob comes with a fully configurable PIN lock that effectively protects against accidental support or unauthorized use.
A CONTROL OF THE WHOLE HOUSE
Control the lights, turn on the music, manage the temperature, close the blinds and doors and open the door. The Keyfob activates virtually every device and scene you want.
IRREPLACEABLE AT WORK
Designed for the home, the KeyFob is just as priceless at work. At home, in the studio or in the office, the KeyFob will quickly become your most valuable assistant, always ready to go.
NEEDS ACCESS
Allow unauthorized users to access only the functions they need to perform their tasks.
COMFORT AND SAFETY
Upon arriving home, the KeyFob can effortlessly open the garage, turn on the driveway for your safety and comfort, and disarm the alarm in your home. Each of these actions can be triggered independently or with only one support that can launch the entire sequence of actions as a particular scene.
A CONTROL MADE FOR YOU
Both mobile and portable, the KeyFob ensures a comfortable and complete control of the house. Keep your personal controller with you wherever you go.
OPEN THE DOOR BEFORE YOUR EYES
Open the electronic locks, when you go home or when your friends are at the door. Open a new dimension of convenience, while maintaining the highest level of security.
MAKE EASIER LIFE TO YOUR NEIGHBORS
Access to daily domestic responsibilities is not only a convenience. Give your family more than just comfort. Give them the joy of a house in good working order.
FUNCTIONS
-
Remote key holder
-
Compatible with any Z-Wave or Z-Wave controller +
-
Security of radio communication via AES-128 encryption
-
Pocket Format
-
Equipped with 6 easily recognizable buttons
-
24 different actions: single / double / triple press and hold for each button
-
6 configurable key sequences
-
Automatically lockable by PIN code
-
Control virtually any device and scene you want
-
Easy to use menu
-
Actions confirmed by the built-in LED
Especificação
Compatibilidade controlador principal | |
---|---|
eeDomus+ | Not tested |
Fibaro Home Center 2 v4.160 | full compatible |
Fibaro Home Center Lite v.4.160 | full compatible |
Vera Edge / Plus / Secure | Not tested |
Zipabox/Zipaminicro/ZipaTile | Not tested |
Piper / Piper NV (v.1.7.1) | Not tested |
Indigo | Not tested |
jeedom | Compatible |
Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | Not tested |
Domoticz | Not tested |
OpenHAB | Not tested |
Tech Data | |
Power Supply | CR2450 3.0V battery (included) |
Explorer Frames - NWI Support | No |
SDK | 6.51.09 |
App Version | 3.02 |
Device Type | Wall Controller |
Z-Wave Alliance Product Link | http://products.z-wavealliance.org/products/2064 |
Procedures | |
Incluison | 1) Place the KeyFob within the direct range of your Z-Wave controller. 2) Set the main Z-Wave controller in (security/non-security) add mode (see the controller’s manual). 3) Press any button three times. 4) Wait for the adding process to end. 5) Successful adding will be confirmed by the Z-Wave controller’s message and green LED colour. |
Exclusion | 1) Place the KeyFob within the direct range of your Z-Wave controller. 2) Set the main Z-Wave controller in remove mode (see the controller’s manual). 3) Press O and – simultaneously. 4) Press Δ or X until LED glows green. 5) Press + to confirm. 6) Wait for the removing process to end. 7) Successful removing will be confirmed by the Z-Wave controller’s message. |
Factory Reset | Reset procedure allows to restore the device back to its factory settings, which means all information about the Z-Wave controller and user configuration will be deleted. There are two ways of resetting the device: • Resetting using the menu 1) Press O and – simultaneously. 2) Press Δ or X until LED glows yellow. 3) Press + to confirm. • Resetting on start-up 1) Remove the battery. 2) Hold O and + while inserting the battery. Successful resetting will be confirmed by smoothly brightening and dimming of the yellow LED colour. |
Wake Up | The Keyfob needs to be woken up to receive information about the new configuration from the Z-Wave controller, like parameters and associations. To wake up the device press O and + simultaneously or use 1st menu position: 1) Press O and – simultaneously. 2) Press Δ or X until LED glows white. 3) Press + to confirm. |