€ 129,89
Taxas não incluidas: € 107,35
Descrição
This Z-Wave Plus module is used for energy measurements in the single-phase power grid up to 65A. This meter directly measures energy in 2-wire networks according to the principle of fast sampling of voltage and current signals. An integrated microprocessor calculates the energy, power and power factor of the measured signals.
This module can also be retrofitted to the Z-Wave home automation controller. In addition, it acts as a repeater to improve the reach and stability of the Z-Wave network.
Designed to be mounted on a DIN rail, this Smart Meter module is the first Z-Wave module installed in an electrical panel.
The module can also control electrical devices (switching on / off) with the addition of the following external relays:
- BICOM432-40-WM1 bistable switch (32A), controlled by the optical communication port (IR)
- Contactor (32A) IKA232-20 / 230 V controlled by the output on terminal 5
Finally, it should be noted that the QUBINO brand has set obligations of quality and durability: they have carefully selected high-performance components. Numerous quality control tests were also carried out on the module to ensure maximum durability (resistant enough to operate at temperatures ranging from -10 ° C to 40 ° C).
Note: Attention, this module requires the neutral to function.
FUNCTIONS:
- Measurement of overall power consumption or of a circuit
- Provides voltage, current, active, reactive and apparent power, and power factor
- Integrates the Z-Wave 500 series chip (Z-Wave +)
- 250% faster communication compared to standard Z-Wave devices
- The world's first Z-Wave DIN rail module
- Operating Temperature -10 to 40 ° C
- Optical communication port (IR) for external relay BICOM432-40-WM1
- Output for connecting an external contactor IKA232-20 / 230 V
- Installation in electrical panel
TECHNICAL CHARACTERISTICS :
- Smart Meter
- Power supply: 230 V (± 20%)
- Power consumption: <2W
- Reference current (Iref): 5 A
- Maximum current (Imax): 65 A
- Minimum current (Imin): 0.25 A
- Starting current: 20 mA
- Specifications:
- Power and Active Power:
- Standard EN 62053-21: Class 1
- Standard EN 50470-3: Class B
- Reactive energy:
- Standard EN 62053-23: Class 2
- Power and Active Power:
- Radio transmission frequency: 868.42MHz, Z-Wave
- Range: up to 30 m indoors (depending on surrounding materials)
- Operating temperature: -10 ~ 40 ° C
- IP protection: IP20
- Dimensions (W x H x D): 90 x 64 x 36mm
- Weight: 150g
- Certifications: CE, RoHs
User manual
Especificação
Compatibilidade controlador principal | |
---|---|
eeDomus+ | Full Compatible |
Fibaro Home Center 2 v4.160 | Partial Compatible: - Inclusion OK - Exclusion OK - Metering OK - Control NO |
Fibaro Home Center Lite v.4.160 | Partial Compatible: - Inclusion OK - Exclusion OK - Metering OK - Control NO |
Vera Edge / Plus / Secure | Not Tested |
Zipabox/Zipaminicro/ZipaTile | Not Tested |
Piper / Piper NV (v.1.7.1) | Not Tested |
Indigo | Not Tested |
jeedom | Not Tested |
Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | Compatible |
Domoticz | Not Tested |
ZiHome | Not Tested |
Tech Data | |
Power Supply | 230V |
Attachable Loads | |
Explorer Frames - NWI Support | YES |
SDK | 5.4 |
App Version | Firm 6.5 |
Device Type | Meter |
Z-Wave Alliance Product Link | |
Procedures | |
Incluison | Triple Click on button |
Exclusion | |
Factory Reset | |
Wake Up |