€ 64,99
Taxas não incluidas: € 53,71
Descrição
The Fibar Insert Motor Control FIB-FGR-223 allows controlling motors for jalousies, blinds, garage doors or other single-phase AC devices both wirelessly via Z-Wave and locally utilizing a traditional wall switch. This insert enables a precise positioning of motors with mechanical and electrical limit switch. In addition, this device has a power monitoring.
The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the Fibar insert that is controlling the load. The solution works with all switch design with or without neutral position as long as there is enough space in the wall box behind the switch. The device is just 15 mm height. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box. This device is designed for a 3 wire system and needs a neutral wire in the wall box.
Product Highlights:
- Controlled by Fibaro System devices or any Z-Wave controller
- Microprocessor control
- Executive elements: relays
- Connected motor’s current and historical power consumption measured
Technical Data:
Power Supply | 110 - 230 V ±10% 50/60Hz |
Supplied motor type | Single phase, VAC |
Supported limit switches type | Electronic and mechanic |
Power of supplied motor | up to 1kW for 230V up to 500W for 110V |
In accordance with EU standards | LVD (2006/95/EC) EMC (2004/10B/EC) R&TTE(1999/5/EC) |
Circuit Temperature limit | 105 °C |
Operational Temperature | 0 - 40 °C |
For installation in boxes | Ø ≥ 50mm |
Radio protocol | Z-Wave + |
Radio Frequency | 868,4 MHz EU; |
Radio signal power | 1mW |
Range | up to 100m outdoors up to 30m indoors (depending on building materials used) |
Dimensions (L x W x H) | 42 x 37 x 17 mm |
Electricity consumption | < 0,8W |
Especificação
Origen | |
---|---|
Made in | Poland |
Compatibilidade controlador principal | |
eeDomus+ | full compatible |
Fibaro Home Center 2 v4.160 | full compatible |
Fibaro Home Center Lite v.4.160 | full compatible |
Vera Edge / Plus / Secure | Full Compatible |
Zipabox/Zipaminicro/ZipaTile | full compatible |
Piper / Piper NV (v.1.7.1) | No tested |
Indigo | Compatible (Testing) |
jeedom | Full Compatible |
Domoticz | full compatible |
ZiHome | full compatible |
Vera 3 | full compatible |
Vera Lite | full compatible |